MSR385WD: Data Logger With Wireless Transmission – LTE or LAN Terminal for Remote Climate Monitoring
wireless data logger for temperature, humidity, air pressure · 1 million measured values storage capacity · transmitter modules for operating temperatures up to +125 °C · ideal for long-term monitoring of climate values
The transmitter modules equipped with temperature, humidity and/or air pressure radio sensors transmit the measured values to the MSR385WD data logger in an ISM band that can be used licence-free. Due to their heat resistance, the transmitter modules – depending on the housing type – allow metrological applications even at high working temperatures of up to +125°C. Thanks to the compact housing, they can also be placed in locations that are difficult to access. Optimised power management ensures that the power supply of the transmitter modules is guaranteed for over ten years, depending on the enclosure type, frequency of measurements and transmission interval.
MSR385WD data logger: receiving station with LTE or LAN and USB interface
The centrepiece of the wireless measurement system is the MSR385WD data logger, which is equipped with a memory capacity of more than one million measured values. This multi-channel data logger has an integrated ISM band receiver module through which it receives and stores data from up to ten MSR385SM transmitter modules. The data logger is supplied with power by means of a USB connection; with the integrated rechargeable 2400 mAh lithium-polymer battery, it can be operated autonomously for up to two days. A flash memory safeguards the data security in the event of a power failure. The colour OLED display of the data logger is at your disposal for simply reading the measured values locally from the transmitter modules.
Ideal for remote climate monitoring: retrieve measured data from the MSR SmartCloud
The web-based cloud service by MSR allows the user to store the measured data transmitted by the LTE/LAN terminal of the logger on a server via the Internet. This way, measured data can not only be retrieved and observed using any PC with an Internet connection, wherever you are; via MSR SmartCloud alarm messages can be received if limit values are exceeded and, if required, the data from several MSR data loggers can be shared with other people.
The measured data of the small wireless transmitter modules recorded by the data logger can be read out via a USB interface and processed further using the MSR PC software for data analysis purposes. Alternatively, you can use the optional LTE or LAN terminal to access the mobile network and to transmit the data to the MSR SmartCloud for remote monitoring at an interval that can be adjusted individually.
Configure your own custom MSR385WD variant here!
With a few clicks you are able to select and send us your order of your desired MSR385WD.
1. Select the temperature range and the housing of the MSR385SM transmitter module.
The level of the temperature to which you are going to expose the transmitter module determines the composition of its housing. Therefore, first of all please select the housing for the desired temperature range here. This concerns only the transmitter module – the actual data logger is selected in step 3.
Temperature range
Housing and battery
Picture
Size & weight
Medium
Item No.
-20...+125 °C
Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, not encapsulated, IP 60
35 x 25 x 55 mm (W x H x L) approx. 25 g
Air
385SMB63
CHF 318.00
Silicone hose with non user replaceable 800 mAh Li-SOCl2 battery, encapsulated, waterproof IP 67
35 x 25 x 55 mm (W x H x L) approx. 40 g
Air, various liquids
385SMB64
CHF 403.00
-20...+85 °C
ABS housing with replaceable 3600 mAh Li-SOCl2 battery (> 10 years @ transmission freq. of 15 min.), external aerial, not encapsulated, IP 64
60 x 33 x 80 mm (W x H x L) Antenna length: 93 mm approx. 120 g
Air
385SMB66
CHF 282.00
-20...+65 °C
ABS housing with rechargeable 260 mAh LiPo battery, not encapsulated, IP 60
38 x 15 x 78 mm (W x H x L) approx. 45 g
Air
385SMB65
CHF 195.00
Technical data MSR385SM transmitter module
Frequency band:
Unlicensed frequency range at 868 MHz (EU version) or 915 MHz (US-Version, on request).
Range:
Up to 500 m (outdoors).
LED:
Red, status acknowledgement when button is pushed, on/off, measurement interval setting.
Power supply:
Rechargeable 260 mAh LiPo battery or 800 mAh Li-SOCl2 battery or replaceable 3600 mAh Li-SOCl2 battery. The LiPo battery is charged via the USB connection. Energy-efficient through optimised power management.
Operating conditions:
-20...+125 °C, in ABS housing -20...+65 °C or +85 °C, respectively.
Storage conditions:
+5 °C…+45 °C (ideal storage conditions for battery).
10…95 % relative humidity, non-condensing.
2. Select the sensors for the MSR385SM transmitter module.
You can equip the transmitter module with up to three different internal and/or external sensors. We are continuously expanding our range of sensor combinations.
Measured parameter / Measuring/storage rate
Working range / Accuracy
Internal sensor
External sensor (according to cable length)
0.20 m
1.00 m
1.60 m
Temperature
1 s, 10 s, 1 min, 15 min, 1 h
-40...+125 °C ±0.2 °C (-10...+50 °C) ±1 °C (-40...+125 °C)
10...2000 mbar absolute external: -40...+85 °C internal: -20...+65 °C Max. deviation: ±2 mbar (1% FS) (750...1100 mbar absolute, +25 °C)
Item no. P5
CHF 84.00
Item no. FP10/020
CHF 159.00
Item no. FP10/100
CHF 170.00
Item no. FP10/160
CHF 182.00
0...14 bar absolute -20...+85 °C ±40 mbar (1...10 bar abs., 0...+40 °C)
Item no. P7
CHF 84.00
Item no. FP7/020
CHF 159.00
Item no. FP7/100
CHF 170.00
Item no. FP7/160
CHF 182.00
3. Select the MSR385WD Wireless Data Logger here.
If you already own a MSR385WD and wish to reorder just transmitter modules, you can skip step 3.
General technical information on the MSR385WD wireless data logger
Item no.
The data logger, which operates within the 868 MHz (EU version) or 915 MHz (US version, on request) ISM frequency band, receives and stores the measured data from up to ten MSR385SM transmitter modules. Flash memory for data security in the event of a power failure. Brilliant, high-contrast OLED (organic light-emitting diode) colour display.
Dimensions:
Housing without aerial: 75 x 25 x 120 mm (W x H x L) Aerial length: 85 mm
Memory capacity:
Over 1 000 000 measured values.
Power supply:
Via USB connection (2 days’ autonomous operation possible with integrated 2400 mAh LiPo battery).
LED:
Blue: Data recording indicator
Red: Alarm indicator
Yellow: Charge level indicator
Key button:
To operate the menu functions of the OLED display.
Interface:
USB, LTE
PC-Software:
Free Setup, Reader, Viewer & Online software for recording and analysing the data (Windows 7+).
Operating conditions:
-20 °C to +65 °C.
Storage conditions:
+5...+45 °C (ideal storage conditions for battery).
10...95 % relative humidity, non-condensing.
Standards:
The MSR385WD complies with the EU Directive RoHS / WEEE.
385WDB61
CHF 575.00
4. Do you require terminal for transmitting the measured data to the MSR SmartCloud?
An LTE terminal with a SIM card will be needed if measurement data is to be sent to MSR SmartCloud via a mobile network. A LAN terminal will be needed if measurement data is to be sent to MSR SmartCloud via LAN.
Item
Description
Item no.
LTE terminal
LTE terminal, incl. short aerial and connecting cable. The SIM card for the LTE terminal can be ordered separately.
LTE frequency bands:
B1, B3, B7, B8, B20
Dimensions:
66 x 26 x 77 mm (W x H x L)
Weight:
80 g
Operating conditions:
-30 °C...+75 °C
Power supply:
via MSR385WD
N10129
CHF 377.00
LTE aerial
External magnetic foot aerial with 3 m cable.
N10121
CHF 66.00
SIM card (EU version)
1 SIM card
Sending data via mobile network to MSR SmartCloud for the first 12 months.
N10111
CHF 122.00
Extension (EU version)
Sending data via mobile network to MSR SmartCloud for subsequent 12 month period.
N10113
CHF 96.00
Item
Description
Item no.
LAN terminal
The MSR Base Station (LAN Box) allows automated transmission of measurement data via LAN to MSR SmartCloud.
N10110
CHF 291.00
5. The use of MSR SmartCloud.
The cloud solution managed by MSR Electronics GmbH records data measured by MSR data loggers in a database. Through online access to MSR SmartCloud you are able to gain insight into your measured data, manage it, and create alert messages. When ordering the MSR385WD data logger you will automatically receive the access code to MSR SmartCloud.
Service
Description
MSR SmartCloud
Free access to MSR SmartCloud when you purchase the MSR385WD data logger. Data capacity up to 100,000 measurements, Data memory up to three months.
6. Place your order.
Order by phone, fax or email
The following codes denote the type of datalogger and sensors you have selected. When placing an order by telephone, fax or e-mail, please have the codes ready.