Company

  • MSR Electronics GmbH

MSR385WD: Data Logger with Wireless Transmission – LTE or LAN Terminal for Remote Climate Monitoring

wireless data logger for temperature, humidity, air pressure · 1 million measured values storage capacity · transmitter modules for operating temperatures up to +125 °C · ideal for long-term monitoring of climate values

With the MSR385WD wireless data logger, you can permanently record temperature, humidity and pressure at various measuring points and at operating temperatures from -20 °C to +125 °C and monitor them regardless of location.

Temperature-resistant transmitter modules MSR385SM

The transmitter modules equipped with temperature, humidity and/or air pressure radio sensors transmit the measured values to the MSR385WD data logger in an ISM band that can be used licence-free. Due to their heat resistance, the transmitter modules – depending on the housing type – allow metrological applications even at high working temperatures of up to +125°C. Thanks to the compact housing, they can also be placed in locations that are difficult to access. Optimised power management ensures that the power supply of the transmitter modules is guaranteed for over ten years, depending on the enclosure type, frequency of measurements and transmission interval.

MSR385WD data logger: receiving station with LTE or LAN and USB interface

The centrepiece of the wireless measurement system is the MSR385WD data logger, which is equipped with a memory capacity of more than one million measured values. This multi-channel data logger has an integrated ISM band receiver module through which it receives and stores data from up to ten MSR385SM transmitter modules. The data logger is supplied with power by means of a USB connection; with the integrated rechargeable 2400 mAh lithium-polymer battery, it can be operated autonomously for up to two days. A flash memory safeguards the data security in the event of a power failure. The colour OLED display of the data logger is at your disposal for simply reading the measured values locally from the transmitter modules.

Ideal for remote climate monitoring: retrieve measured data from the MSR SmartCloud

The web-based cloud service by MSR allows the user to store the measured data transmitted by the LTE or LAN terminal of the logger on a server via the Internet. This way, measured data can not only be retrieved and observed using any PC with an Internet connection, wherever you are; via MSR SmartCloud alarm messages can be received if limit values are exceeded and, if required, the data from several MSR data loggers can be shared with other people.

The measured data of the small wireless transmitter modules recorded by the data logger can be read out via a USB interface and processed further using the MSR PC software for data analysis purposes. Alternatively, you can use the optional LTE or LAN terminal to access the mobile network and to transmit the data to the MSR SmartCloud for remote monitoring at an interval that can be adjusted individually.

Configure your MSR385WD here
...or buy it in the webshop

With a few clicks you are able to select and send us your enquiry of your desired wireless data logger. If you require several transmitter modules with different configurations, please send us a separate enquiry for each individual configuration. In this case, you only need to opt once for the data logger that can be selected under item 3. You can reorder transmitter modules and data loggers independently at any time.

1. Select the temperature range and the housing of the MSR385SM transmitter module.

The level of the temperature to which you are going to expose the transmitter module determines the composition of its housing. Therefore, first of all please select the housing for the desired temperature range here. This concerns only the transmitter module – the actual data logger is selected in step 3.

Temperature
range
Housing and battery Picture Size & weight Medium Item No.
-20...+125 °C Silicone hose with
non user replaceable
800 mAh Li-SOCl2 battery,
not encapsulated, IP 60
For operating temperatures from -20 °C to +125 °C: MSR385SM transmitter module in silicon hose, 800 mAh Li-SOCl2 battery, not encapsulated, IP 60 35 x 25 x 55 mm (W x H x L)
approx. 25 g
Air 385SMB63
EUR 324.00
Silicone hose with
non user replaceable
800 mAh Li-SOCl2 battery,
encapsulated, waterproof IP 67
For operating temperatures from -20 °C to +125 °C: MSR385SM transmitter module in silicon hose, 800 mAh Li-SOCl2 battery, encapsulated, IP 67 35 x 25 x 55 mm (W x H x L)
approx. 40 g
Air,
various liquids
385SMB64
EUR 411.00
-20...+85 °C ABS housing with
replaceable 3600 mAh
Li-SOCl2 battery
(> 10 years @
transmission freq. of 15 min.),
external aerial,
not encapsulated, IP 64
For operating temperatures from -20 °C to +85 °C: MSR385SM transmitter module with external aerial and 3600 mAh Li-SOCl2 battery, IP 64 60 x 33 x 80 mm (W x H x L)
Antennenlänge: 93 mm
approx. 120 g
Air 385SMB66
EUR 287.00
-20...+65 °C ABS housing with rechargeable
260 mAh LiPo battery,
not encapsulated, IP 60
For operating temperatures from -20 °C to +65 °C: MSR385SM transmitter module in ABS housing, 260 mAh battery, not encapsulated, IP 60 38 x 15 x 78 mm (W x H x L)
approx. 45 g
Air 385SMB65
EUR 199.00

Technical data MSR385SM transmitter module

Frequency band: Unlicensed frequency range at 868 MHz (EU version) or 915 MHz (US-Version, on request).
Range: Up to 500 m (outdoors).
LED: Red, status acknowledgement when button is pushed, on/off, measurement interval setting.
Power supply:   Rechargeable 260 mAh LiPo battery or 800 mAh Li-SOCl2 battery or replaceable 3600 mAh Li-SOCl2 battery. The LiPo battery is charged via the USB connection. Energy-efficient through optimised power management.
Operating conditions: -20...+125 °C, in ABS housing -20...+65 °C or +85 °C, respectively.
Storage conditions:
  • +5 °C…+45 °C (ideal storage conditions for battery).
  • 10…95 % relative humidity, non-condensing.

2. Select the sensors for the MSR385SM transmitter module.

You can equip the transmitter module with up to three different internal and/or external sensors. We are continuously expanding our range of sensor combinations.

Measured parameter /
Measuring/storage rate
Working range /
Accuracy
Internal
sensor
External sensor (according to cable length)
0.20 m 1.00 m 1.60 m
Temperature

1 s, 10 s, 1 min, 15 min, 1 h
-40...+125 °C
±0.2 °C (-10...+50 °C)
±1 °C (-40...+125 °C)
Item no. T5
EUR 86.00
Item no. FT5/020
EUR 162.00
Item no. FT5/100
EUR 173.00
Item no. FT5/160
EUR 186.00
Relative humidity
with integrated temperature

1 s, 10 s, 1 min, 15 min, 1 h
0...100 % rel. humidity
-40...+125 °C

±1.8 % rel. humidity
(10...85 %, 0...+40 °C)
±4 % rel. humidity
(85...95 %, 0...+40 °C)
Item no. H2
EUR 86.00
Item no. FH2/020
EUR 162.00
Item no. FH2/100
EUR 173.00
Item no. FH2/160
EUR 186.00
Air pressure absolute

1 s, 10 s, 1 min, 15 min, 1 h
10...1100 mbar absolute
-40...+125 °C

±2.5 mbar
(750...1100 mbar abs.,
0...+85 °C)
Item no. P6
EUR 86.00
Item no. FP6/020
EUR 162.00
Item no. FP6/100
EUR 173.00
Item no. FP6/160
EUR 186.00
10...2000 mbar absolute
external: -40...+85 °C
internal: -20...+65 °C

Max. deviation:
±2 mbar (1% FS)
(750...1100 mbar absolute,
+25 °C)
Item no. P5
EUR 86.00
Item no. FP10/020
EUR 162.00
Item no. FP10/100
EUR 173.00
Item no. FP10/160
EUR 186.00
0...14 bar absolute
-20...+85 °C

±40 mbar
(1...10 bar abs., 0...+40 °C)
Item no. P7
EUR 86.00
Item no. FP7/020
EUR 162.00
Item no. FP7/100
EUR 173.00
Item no. FP7/160
EUR 186.00

3. Select the MSR385WD Wireless Data Logger here.

If you already own a MSR385WD and wish to reorder just transmitter modules, you can skip step 3.

General technical information on the MSR385WD wireless data logger Item no.
MSR385WD Wireless Data Logger with integrated ISM band receiver. Receives and stores the measured data of up to ten transmitter modules (MSR385SM).

The data logger, which operates within the 868 MHz (EU version) or 915 MHz (US version, on request) ISM frequency band, receives and stores the measured data from up to ten MSR385SM transmitter modules. Flash memory for data security in the event of a power failure. Brilliant, high-contrast OLED (organic light-emitting diode) colour display.

Dimensions: Housing without aerial: 75 x 25 x 120 mm (W x H x L)
Aerial length: 85 mm
Memory capacity: Over 1 000 000 measured values.
Power supply:   Via USB connection (2 days’ autonomous operation possible with integrated 2400 mAh LiPo battery).
LED:
  • Blue: Data recording indicator
  • Red: Alarm indicator
  • Yellow: Charge level indicator
Key button: To operate the menu functions of the OLED display.
Interface: USB, LTE
PC-Software: Free Setup, Reader, Viewer & Online software for recording and analysing the data (Windows 7/8/10).
Operating conditions:   -20 °C to +65 °C.
Storage conditions:
  • +5...+45 °C (ideal storage conditions for battery).
  • 10...95 % relative humidity, non-condensing.
Standards: The MSR385WD complies with the EU Directive RoHS / WEEE.
385WDB61
EUR 586.00

4. Do you require a terminal for transmitting the measured data to the MSR SmartCloud?

An LTE terminal with a SIM card will be needed if measurement data is to be sent to MSR SmartCloud via a mobile network. A LAN terminal will be needed if measurement data is to be sent to MSR SmartCloud via LAN.

Item Description Item no.

LTE terminal

LTE terminal for transmitting the measured data from the MSR385WD data logger to the MSR SmartCloud.

LTE terminal, incl. short aerial and connecting cable. The SIM card for the LTE terminal can be ordered separately.

LTE frequency bands:   B1, B3, B7, B8, B20
Dimensions: 66 x 26 x 77 mm (W x H x L)
Weight: 80 g
Operating conditions: -30 °C...+75 °C
Power supply: via MSR385WD
N10129
EUR 384.00

LTE aerial

External magnetic foot aerial with 3 m cable.

N10121
EUR 67.00

SIM card
(EU version)

  • 1 SIM card
  • Sending data via mobile network to MSR SmartCloud for the first 12 months.
N10111
EUR 124.00

Extension
(EU version)

  • Sending data via mobile network to MSR SmartCloud for subsequent 12 month period.
N10113
EUR 98.00

 

Item Description Item no.

LAN terminal

The MSR Base Station for automated transmission of measurement data via LAN to MSR SmartCloud.

The MSR Base Station (LAN Box) allows automated transmission
of measurement data via LAN to MSR SmartCloud.

N10110
EUR 297.00

5. The use of MSR SmartCloud.

The cloud solution managed by MSR Electronics GmbH records data measured by MSR data loggers in a database. Through online access to MSR SmartCloud you are able to gain insight into your measured data, manage it, and create alert messages. When ordering the MSR145W2D data logger you will automatically receive the access code to MSR SmartCloud.

Service Description
MSR SmartCloud Free access to MSR SmartCloud when you purchase the MSR145W2D data logger.
Data capacity up to 100,000 measurements, Data memory up to three months.

6. Place your enquiry.

Enquire by phone, fax or email

The following codes denote the type of data logger and sensors you have selected. When placing an enquiry by telephone, fax or Email, please contact the dealership in your country and have the codes ready.

List of the international dealerships


Module Product code Price Qty. Subtotal
Transmitter module:
Data logger:
Total price EUR net:

Enquire using the contact form

Please enter your contact details, accept the privacy policy and send us your enquiry with a simple click. We will get back to you within the next few days. We will get back to you within the next few days.

Title*  
First name*    
Surname*    
Company    
Industry  
Number, street*    
Zip code/postcode*    
City*    
Country*    
Phone*    
Fax    
Email*    
 
Notes:
 
I agree to the General Terms and Conditions and the use of my personal data pursuant to the Privacy Policy of MSR Electronics GmbH.*
I would like to subscribe to the free MSR newsletter.I can revoke my consent to this at any time in the unsubscribe link of the newsletter. I can find further information in the Privacy Policy of MSR Electronics GmbH.
 

*Required fields

Product features wireless data logger MSR385WD and transmitter modules MSR385SM

MSR385WD data logger

  • Wireless data logger with receiver module in the 868 MHz ISM band (EU version), (915 MHz US version, on request)
  • Receives and stores data from up to ten MSR385SM transmitter modules
  • Over 1 million readings storage capacity
  • Flash memory for data security in case of power failure
  • Interface for LTE and USB
  • Brilliant, high-contrast OLED (organic light-emitting diode) colour display
  • Power supply via USB connection, 2 days of autonomous operation possible with integrated Li-Po battery 2400 mAh
  • Free MSR PC software: MSR Setup, Reader, Viewer and Online software

MSR385SM transmitter modules

  • Up to three internal or external temperature, humidity or air pressure radio sensors per transmitter module
  • Transmitter modules available for operating temperatures up to +125 °C
  • Depending on the transmitter module, the frequency of measurements and the transmission interval, the energy supply of the transmitter modules is guaranteed for more than 10 years
  • Frequency range: licence-free frequency range 868 MHz (EU version), or 915 MHz (US version, on request)
  • Up to 500 m range outdoors

Options

  • LTE terminal with SIM card, short antenna and connection cable for transmitting the measurement data from the data logger via mobile network to the MSR SmartCloud
  • MSR base station (LAN box) for transferring the measurement data from the data logger via LAN to the MSR SmartCloud
  • MSR SmartCloud: retrieve, evaluate and export measured data online; alarm message when limit values are exceeded

 

Technical data of the sensors, housings and batteries

Technical details can be found on the Configurator tab.

General technical data of the wireless data logger MSR385WD

Memory capacity: Over 1 000 000 measured values.
Key button: To operate the menu functions of the OLED display.
LED:

 

  • Blue: Data recording indicator
  • Red: Alarm indicator
  • Yellow: Charge level indicator
Power supply: Lithium-polymer battery (2400 mAh), rechargeable via USB port
OLED display: High-contrast, brilliant OLED (organic light-emitting diode) colour display for showing data and graphics, resolution 96 x 64 pixels.
Interface: USB, LTE terminal
Operating conditions:
Temperature: -20…+65 °C
Storage conditions:
Temperature:
Humidity:
+5 °C…+45 °C (ideal storage conditions for battery)
10…95 %  relative humidity, non-condensing
Standards: The MSR385WD complies with the EU directives RoHS/WEEE.

Software

Our software is scanned for viruses with Microsoft Defender.

 

Instruction manual

Datasheet

Certificate

 

FAQ – frequently asked questions about MSR data loggers

MSR385WD: Record measurement data via wireless data logger and monitor worldwide

Permanently record temperature, humidity and pressure at various measuring points, in inaccessible locations and at operating temperatures from -20 °C to +125 °C and monitor them via the cloud regardless of location: These options are offered by the MSR385WD data logger, which is equipped with wireless sensors and available with an LTE or LAN terminal.

Case studies: 

Benefit from our competence and experience

MSR data loggers are used thousands of times around the world and have proven themselves in a wide variety of applications. Select the desired field of application and we will submit a selection of data loggers and customer reports to you.